Furuno NAVnet DRS2D User Manual
Page 15
8
1.4
Mounting of Power Supply Unit
PSU-013 (for DRS25A)/PSU-012 (Option)
For combinations shown below, the optional power supply unit PSU-012 (Code No.: 000-011-756)
is necessary. The PSU-013 is required for any DRS25A installation.
*Note: The power supply unit is shipped with 15A fuse. Replace fuse with 10A when using the unit
with 24V ship’s battery.
The power supply unit can be installed almost anywhere provided the following conditions are met:
• Location is dry, well ventilated.
• Sufficient maintenance space is available.
• Installated within 2, 5 or 10 m (2 and 10 m: optional supply) from the multi function display.
Do not install the power supply unit on the overhead; install it on the deck or bulkhead. Use four
tapping screws (4x20, supplied) to fasten the power supply unit.
Contents of PSU-0012/013
Name
Type
Code No.
Qty
Remarks
Power supply unit
PSU-012
-
1
PSU-013
-
for DRS25A
Cable assy
VL3P-VV-S2X2C-AA050
000-152-217-10
1
5 m
LAN cable
MOD-Z072-050+
000-167-176-10
1
5 m, standard
Self-tapping screw
4x20, SUS304
000-158-850-10
4
Fuse*
FGB0 250V 10A
000-155-839-10
2
For 24 VDC
FGB0 250V 15A
000-157-874-10
2
For 12 VDC
MFD8
MFD12
MFDBB
DRS2D/4D
DRS4A
DRS6A
DRS12A
NO
NO
NO
NO
NO
NO
NO
YES
YES
YES
YES
NO
Self-tapping screw
(4x20, 4 pcs.)
Power supply unit PSU-012/013