Foundry Networks LS 648 - Manual (Page 10)

Foundry FastIron LS Layer 2 Compact Switch Hardware Installation Guide
2 - 2 © 2007 Foundry Networks, Inc. September 2007
The following figures show the front panels of these FastIron LS models.
Figure 2.1 FastIron LS 624
Figure 2.2 FastIron LS 648
Figure 2.3 FastIron LS 624 and 648 rear panel
Figure 2.4 FastIron LS 624 with module installed
Figure 2.5 FastIron LS 624 and 648 rear panel with modules Installed
Control Features
Each device’s front panel includes the following control features:
• Serial management interface (the port labeled Console)
• Reset button
Serial Management Interface (Console Port)
The serial management interface enables you to configure and manage the device using a third-party terminal
emulation application on a directly connected PC. A straight-through EIA/TIA DB-9 serial cable (M/F) ships with
the device. The serial management interface (the Console port) is located in the right corner of the front panel.
Reset Button
The reset button allows you to restart the system without removing power or using the CLI or Web management
interface. The button is located to the left of the serial management interface and is recessed to prevent it from
being pushed accidentally.
FastIron LS Network Interfaces
The FLS624 and FLS648 provide the following interfaces:
• 10/100/1000 ports with RJ-45 copper connectors
FLS 624
Fastlron LS 624
Fastlron LS 648
45 48 47 46
FLS 648
RPS DC In 12V 13A
100-240V~
50-60Hz 2A
FLS 624
Fastlron LS 624
RPS DC In 12V 13A
100-240V~ 50-60Hz 2A