Fujitsu Siemens Computers V40-1 - Manual (Page 22)

MYRICA V40-1
20 - English A26361-K1070-Z120-1-M119, edition 1
Changing the device settings with the buttons of the control
panel
With the buttons on the control panel, you can make the following settings directly:
Selecting picture signal source
►
Press the INPUT SELECT button. A list of the signal sources is displayed.
► Choose the signal source you require using the VOLUME S/T buttons.
► Press the INPUT SELECT button to activate the signal source.
Adjusting the volume
►
Press the VOLUME S button to open the volume menu.
► Set the volume as required with the VOLUME S/T buttons.
The volume menu automatically disappears again after a short time.
Changing programme
►
Press the VOLUME T button to prepare changing.
► Change to the next or previous programme in the programme list with the buttons
VOLUME S/T.