Fujitsu Siemens Computers V40-1 - Manual (Page 26)

MYRICA V40-1
24 - English A26361-K1070-Z120-1-M119, edition 1
PICTURE menu - picture settings
► Press the MENU button to open the OSD menu.
► Mark the Picture menu item with the / buttons.
► Press the MENU button to activate the menu item.
The buttons available to you for setting the options are shown in the menu footer.
With this function you set the picture mode.
The contrast, brightness, colour and focus of the picture are set to optimum
values depending on the picture mode.
Possible values: Standard, Vivid, Mild, User.
After the User option is selected, a further submenu appears: Mode
Contrast This function increases or decreases the contrast.
Brightness With this function you set the picture brighter or darker.
Color With this function you set the colour saturation.
Sharpness With this function you set the sharpness of the picture.
Recall With this function you reset all parameters of this menu
to the factory settings.
Temperature With this button you set the colour temperature.
Possible values: Cool2, Cool1, Normal, Warm1, Warm2.
Video NR With this function you switch the picture correction (Noise Reduction) on or
off.
Possible values: On, Off
Screen form With this function you set the picture format.
Possible values: 16:9, PANORAMA, ZOOM1, ZOOM2, 4:3.