Fluke 43B - Manual (Page 9)

5
Chapter 1
Introducing the Fluke 43B
Powering the Fluke 43B
To power the Fluke 43B from a standard AC outlet, perform steps 1-3.
For battery power, see Chapter 2.
1
Plug the power adapter into the AC outlet.
2 Connect the power adapter cable to the Fluke 43B (see Figure 2).
Figure 2. Powering the Fluke 43B
3
Turn the Fluke 43B on.
The opening screen will appear on the display (see Figure 3).
Note
If the Fluke 43B does not turn on, the batteries may be dead. Leave
the Fluke 43B connected to the outlet for 15 minutes and try again.