FUNAI LC200EM8G - Manual (Page 6)

6
EN
I
NTRODUCTION
Remote Control Function 5
1
12
11
14
15
13 3
7
5
2
6
8
10
9
4
1. POWER button (p11)
Press to turn the unit on and off.
2. MUTE button (p13)
Press to turn the sound on and off.
3. SLEEP button (p16)
Press to activate the sleep timer.
4. Number buttons (p13)
• Press to select channels.
-/ENT. button
• Press to shift the minor channel
from the major channel.
+100 button
• Press to select 100 or higher
channels. (CATV)
• Press to search if there are minor
channels on the currently selected
major channel. (DTV)
5. CH. K /L buttons (p13)
Press to select channels and the
external input mode.
6. VOL. X/Y buttons (p13)
Press to adjust the volume.
7. ENTER button (p11)
Press to decide the command of
setting when the main menu is
displayed.
8. SETUP button (p11)
Press to display the main menu.
9. s / B / K / L buttons (p11)
Press to move left/ right/ up/
down through the items.
10. RETURN button
Press to return to previous menu
operation.
11. INPUT button (p14)
• Press to access connected an
external device like a DVD player
or VCR.
• Press to switch between the
digital mode (DTV) and analog
mode.
12. DISPLAY button (p15)
Digital Mode (DTV)
• Press to display the channel
information, signal type and TV
setting.
Analog Mode (TV)
• Press to display the channel
number, signal type and TV
setting.
External Input Mode
• Press to display the external
input mode, signal type and TV
setting.
13. AUDIO button (p14)
Digital Mode (DTV)
• Press to select the audio
language.
Analog Mode (TV)
• Press to select the audio mode.
14. SCREEN MODE button (p16)
Press to select aspect ratio
available for the TV screen.
15. CH. RETURN button (p13)
Press to return to previous channel.
Installing the Batteries
Install the batteries (AA x 2) matching the polarity indicated inside battery compartment of the remote control.
2 1 3
5
Battery Precautions:
• Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc) or old batteries with fresh ones.
• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
• Do not try to recharge batteries; they can overheat and rupture.
A714AUH_A7149UH_LC200EM8G_LC200E6 6 2007/04/27 11:19:26