FUNAI LC200EM8G - Manual (Page 9)

9
EN
WATCHING TV
INTRODUCTION
CONNECTION
INITIAL SETTING
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
External Device Connection
[Component Video Cable Connection]
Component video connection offers better picture quality for video devices connected to the unit.
Use a component video cable to connect the unit to external video devices equipped with component video output
jacks.
If you connect to the unit’s component video input jack, connect RCA audio cables to the audio L/R jacks of VIDEO2.
rear of this unit
VIDEO 2
AUDIO COMPONENT
VIDEO 1
AUDIO
L R
L VIDEO S-VIDEO COAXIAL
Pr Pb Y
R
COMPONENT VIDEO OUT
Pr Pb Y
e.g.)
AUDIO OUT
R L
RCA audio cable
component
video cable
(red) (blue) (green)
(red) (red) (blue) (blue) (green) (green) (red) (blue) (green)
DVD player with the component
video output jacks
Note:
• This unit accepts 480i / 480p / simplified 1080i video signals.
• Simplified 1080i video signal differs to the original 1080i video signal because it is displayed after converted into 480p signal.
[S-video Cable Connection]
S-video connection offers good picture quality for video devices connected to the unit.
Use an S-video cable to connect the unit to external video devices equipped with S-video output jack.
If you connect to the unit’s S-video input jack, connect RCA audio cables to the audio L/R jacks of VIDEO1.
rear of this unit
DVD player with the S-video
output jack
e.g.)
AUDIO OUT
R L
S-VIDEO
OUT
RCA audio cable
S-video cable
VIDEO 2
AUDIO COMPONENT
VIDEO 1
AUDIO
L R
L VIDEO S-VIDEO COAXIAL
Pr Pb Y
R
Note:
• If you connect to the S-video jack and the video jack at the same time, the S-video connection will have priority.
5
Cables not included.
Please purchase the necessary cables at your local store.
A714AUH_A7149UH_LC200EM8G_LC200E9 9 2007/04/27 11:19:29