FUNAI LC200EM8G - Manual (Page 7)

7
EN
INTRODUCTION
CONNECTION
INITIAL SETTING
OPTIONAL SETTING
TROUBLESHOOTING
WATCHING TV
INFORMATION
1. SETUP button (p12)
Press to display the main menu.
2. VOLUME X / Y buttons (p13)
Press to adjust the volume or move right(X)/left(Y)
through the main menu items.
3. CHANNEL K / L buttons (p13)
Press to select channels or move up/down through the
main menu items.
4. INPUT button (p15)
• Press to access connected an external device like a
DVD player or VCR.
• Press to switch between the digital mode (DTV) and
analog mode.
5. POWER button (p11)
Press to turn the unit on and off.
6. Infrared Sensor Window
Receives infrared rays transmitted from the remote
control.
Control Panel 5
Rear Panel
5
1. ANT jack (p8)
RF coaxial cable connection for your antenna or
cable /satellite box.
2. HEADPHONE jack
Headphone connection for personal listening.
3. COMPONENT and AUDIO input jacks (p9)
Component video cable connection for an external
device.
Use component video and audio output jacks of an
external device.
4. AUDIO input jacks (p9)
RCA audio cable connection for an external device.
5. VIDEO input jack (p10)
RCA video cable connection for an external device.
6. S-VIDEO input jack (p9)
S-video cable connection for an external device.
7. COAXIAL (digital audio) output jack (p10)
Digital audio coaxial cable connection for a decoder or
an audio receiver.
Use digital audio input jack of an external device.
8. AC power cord
Connect to a standard AC outlet to supply power to
this unit.
6
SETUP INPUT POWER VOLUME CHANNEL
1
top of the unit
2
3
4
5
VIDEO 2
AUDIO COMPONENT
VIDEO 1
AUDIO
L R
L VIDEO S-VIDEO COAXIAL
Pr Pb Y
R
6
5
4
3
7
8
side of the unit
rear of this unit
2
1
A714AUH_A7149UH_LC200EM8G_LC200E7 7 2007/04/27 11:19:28