GE CleanDesign PHP960DM - Manual

70
Built-in CleanDesign ™ cooktops
GE Profile™
PHP960SM
PHP960DM
PHP900SM
PHP900DM
ADA-compliant ●
Features
Ceramic-glass surface Pattern. black
Pattern. black Pattern. black
Pattern. black
Number of elements 5 induction 4 induction
Induction elements ● ●
11" heating elements 1 (3700W) 1 (3700W) )**
8" heating elements 1 (3200W)**
7" heating elements 2 (2500W)** 2 (2500W)**
6" heating elements 1 (1800W) )** 1 (1800W)**
Hot surface indicator lights 5 4
Precise Digital Control System™ ● ●
Pan presence sensor ● ●
Pan size sensor ● ●
Kitchen timer ● ●
Control lock capability ● ●
Appearance
Color appearance* SS
BB
SS
BB
Frameless BB BB
Stainless steel frame SS models only SS models only
Weight & Dimensions
Cooktop width (in inches) 36 30
Approx. shipping wt. (lbs.) 59 49
Power/Ratings
240V 8.6 7.4
KW rating @ 208V 6.5 5.6
240V 50 40
Amps @ 208V 50 40
*SS = Stainless Steel, BB = Black on black.
** Highest wattage available using power share. Consult use and care manual for more
information on powershare.
36" B-I Radiant Cooktops
H
Cooktop
G
Required
E
F
W D
Overall Cutout
To edge of front
counter (min.)
Model W D H E F G
PHP960DM 36 20-7/8 3-1/4* 33-7/8 19-1/8 2-1/2**
PHP900DM 29-3/4 21-3/8 3-1/4* 28-1/2 19-5/8 2-1/2**
* Depth of unit at conduit connection location (rear) is 4-5/8" on model PHP960/900.
** Raised bull nose countertops may require up to 3/8" additional clearance to prevent interference with curved front.
Cooktop dimensions (in inches)
Stainless steel cooktop dimensions (in inches)
Cooktop dimensions (in inches)
Overall Cutout
To edge of front
counter (min.)
Model W D H E F G
PHP960SM 36-1/8 21 3-1/4* 33-7/8 19-1/8 2-1/2**
PHP900SM 29-7/8 21-1/2 3-1/4* 28-1/2 19-5/8 2-1/2**
* Depth of unit at conduit connection location (rear) is 4-5/8" on model PHP960/900.
** Raised bull nose countertops may require up to 3/8" additional clearance to prevent interference with
curved front.
Filler trim kit
When replacing an old GE 30" cooktop (with
larger opening) with 30" models, use the
following one-piece trim kit to fill in the over-
size hole. Available at additional cost.
JXTR32B (Black)
Installation information:
Before installing, consult installation
instructions packed with product for current
dimensional data.
Note: Consult cabinet and countertop manufacturer’s specs for flush mount installation prior to install.
Notes: If installing with a 36" GE Profile or GE Monogram ® Telescopic Downdraft System, consult
both cooktop and downdraft installation instructions packed with product before installing.
Cooktop gas/electric supply may need to be re-routed to install downdraft.
The countertop must be at least 26" deep with a flat surface area of 23-1/2" or more, front to back.
Stainless CleanDesign and gas on glass cooktops require 23-5/8" flat surface area. In addition,
other clearances to the front edge of the countertop must be considered.
Built-in induction cooktops
Requires a 12” min. free area between the
bottom of the cooktop to any combustible
material, i.e. shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Unite are
furnished with a 36” flexible armored cable.
30” and 36” induction cooktops are approved
for use over GE, GE Profile and GE Monogram
30” and 27” single wall ovens*. Refer to cooktop
and wall oven installation instructions packed
with product for current dimensional data.
*Except Trivection ® wall ovens.