Grundig YB500 - Manual (Page 11)

11
Hints and Error Messages
in the Display (4)
Hints (marked by ＊) Error Messages (marked by ＊＊)
＊ RDS Entry of abbreviations disabled. ＊＊ TIMER No automatic function possible without
entry of alarm mode.
＊ NO RDS The station is not broadcasting RDS signals, or
the received signal strength does not meet the
RDS requirements. ＊＊ TIME Clock or switching times not correctly
entered.
＊ NO AF The station is not broadcasting alternative
frequencies. ＊＊ FREQ Frequency not correctly entered
＊ M E M O - - The current frequency is already stored in the
station memory location - - . ＊＊ M - BAND SW -m-band not correctly entered.
＊ NO MEMO No or no further station memory locations are
occupied. ＊＊ MEMORY Station memory location not correctly
entered.
＊ NEW The current frequency is not yet stored ＊＊ ROM TAB With the ROM table being selected, the
"STORE" button has no function.
＊ FREE - - The selected station memory location - - is not
occupied.
＊ FULL All locations of the station memory are
occupied.
＊ LOCKED The locking switch is set to "LOCKED".
＊ KEY All buttons are protected by "Key-protect".