Grundig YB500 - Manual (Page 26)

26
•
The alarm mode or must be selected.
•
Enter the desired switch-on time.
• As the alarm signal has a fixed duration of 5 minutes, it is not
necessary to enter the OFF time.
• Press the AUTO button. If the radio is switched off, the
following indications an visible in the display:
TIME I or TIME II
Clock time
Alarm mode and/or
Switch-on time
- At the programmed time, the alarm signal will sound for 5
minutes max.
- You can enter a switch-off time of your choice with the numeric
buttons and the TIME I/II button. However, this does not apply for
the "wake-up by sound
signal" function.
• Use the TUNE A button to select the menu function ON 2.
• Press the CLEAR button to quit the menu (the entered data will be
stored in memory).
• For ON 2/OFF 2 applies the same as for ON 1 /OFF 1.
Checking the Switching Times 1 /2
•
When you have selected the menu functions ON 1 or ON 2 and
OFF 1 or OFF 2, you can indicate in the display the switch-on
time, the station memory location, the alarm (wake-up) mode,
and the switch-off time by pressing the TUNE A/V button.
Automatic Switching On and Off
- The AUTO button allows you to switch on and off the automatic
functions.
1. With radio programme
• The alarm mode or must be selected.
• Enter the desired switching times.
• Tune to the desired station or select the desired station memory
location and adjust the appropriate volume.
• Press the AUTO button to enable the automatic function.
- The radio is switched off if the current time does not lie within
the programmed automatic time period.
- The following indications are then visible in the display: TIME I or
TIME II
Clock time
Alarm mode and/or
Switch-on time
• If you have selected no alarm mode, a hint with the error
message L TIMER will appear when pressing the AUTO button.
•
It is of course possible to switch the radio on and off with the
ON/OFF button so that you can listen to the radio also at times
which are not lying within the automatic switching period.
•
If 2 switching times are programmed, the display will indicate the
next switch-on time.
- At the programmed times, the radio will automatically be switched
on and off.
Prematurely switching off the radio:
• Press the ON/OFF button.
- The entered switching times are retained.
2. With alarm sound signal