Grundig YB500 - Manual (Page 27)

27
Automatic Functions
•
Briefly press the SNOOZE (2) button
- The alarm sound signal will be interrupted for approx. 5 minutes.
- The symbol will be indicated.
- This function can be repeated as often as desired.
• Press the SNOOZE button a long time.
- The alarm signal will prematurely be switched off (for 24 hours).
- The programmed switching times are retained. 3. With
alarm sound siqnal and radio proqramme
•
The functions "wake-up by radio programme" and "wake-up by
alarm sound signal" can be combined.
• Enter the alarm times as described under paragraphs 1 and 2.
Switching Off the Automatic Functions
• Press the AUTO button.
- The alarm mode indications must disappear.
- The programmed switching times are retained.
Timer Recordings
If you possess a cassette recorder with start/stop remote control
facility, you can use the switching times of the radio to switch on and
off the cassette recorder for recording radio programmes.
Proceed as follows:
•
Connect the output switch jack (29) with the switch jack of
the cassette recorder.
Automatic Control of a Cassette Recorder
For this, you require an appropriate connecting cable. Please
contact your specialized dealer or the GRUNDIG After-Sales
Department.
To make recordings with the cassette recorder, the LINE OUT
socket(* of the radio must be connected with the LINE IN socket of
the cassette recorder.
• Switch the cassette recorder to recording-start. When the Yacht
Boy 500 is automatically switched on, the cassette recorder is
also automatically started and records the programme
broadcasted by the selected station.