GE 15-Feb - Manual (Page 14)

12
T
ROUBLESHOOTING
G
UIDE
Problem Solution
No dial tone. • Check hook switch to make
Won't dial out sure it pops up.
• Make sure speakerphone indicator comes
on (if using speakerphone.)
• Make sure TONE/PULSE is set to correct
position.
• Unplug the phone, wait 30 seconds, and
plug the phone back in.
Phone doesn’t ring • Check RINGER VOLUME.
• Could have too many phones on one
line. (The total LN of all phones should
not be greater than the maximum LN
for your calling area, Usually 5.)
Low handset or • Check the volume settings (see p. 8).
speaker volume
Light and tone • This is normal as power is fluctuating
feedback flutter when with phone outpulsing.
dialing in PULSE mode.
Can’t be heard by • Make sure phone cord is securely
other party plugged in.
• Make sure MUTE indicator is off.
Memory dialing • Make sure you entered numbers
correctly. (See "Memory Dialing.")