GE Universal Remote Control RM94940 - Manual (Page 15)

14
Programming With Code Search
If your TV, VCR, DVD player, DBS Satellite System,
Cable Box or CD player does not respond after you
have tried all the codes for your brand, or if your
brand is not listed, try searching your code by follow-
ing the steps below:
1. Manually turn on the device
you wish to program.
2. Press and hold the CODE
SEARCH until the INDICATOR
LIGHT lights, then release
CODE SEARCH.
3. Press and release the device
button for the device you
are programming. The INDI-
CATORLIGHT will blink
once, then remain lit.
NOTE: For AUX programming
carry out programming pro-
cedure on page 11 for the
device you are assigning to
AUX prior to starting a Code
Search.
4. Press and release ON•OFF
until your device turns off.
5. When your device turns off,
press ENTER, the INDICATOR LIGHT will turn off.
Identifying Codes From Your Universal Remote
If you need to find the three-digit code for your TV,
DVD, VCR, DBS System, Cable Box or CD player after
your device is set-up, use this
procedure.
1. Press and hold CODE
SEARCH until the INDICA-
TOR LIGHT lights, then
release CODESEARCH.
2. Press and release the
device button for the code
you are retrieving. The INDI-
CATORLIGHT will blink
once.
CD CBL/SAT
CD CBL/SAT
AUX
AUX
94940 Revised Size 10/18/02 12:22 PM Page 15