GE 27730 - Manual (Page 9)

9
5. After charging, remove and
reattach the mounting bracket by
inserting the two tabs at the top
and then snapping the tab at the
bottom into place.
6. Plug the phone line cord into the
phone jack on the back of the
unit and then into the wall jack.
7. Slip the mounting holes over the
wall plate posts and slide the unit
down firmly into place. (Wall
plate not included.)
NOTE : The phone automatically
defaults to touch-tone dialing. To
change to pulse (rotary) dialing,
see “Tone/Pulse Dialing.” If you
don’t know which type of service
you have, check with the phone
company.
CAUTION: Use only the Thomson
5-2470 power supply that came with
this unit. Using other power supplies
may damage the unit.
6
7
5