Global Machinery Company HG2000K - Manual (Page 5)

5
17. Stay alert. Watch what you are doing. Use common
sense. Do not operate a power tool when you are
tired.
18. Check for damaged parts. Before using a tool,
check that there are no damaged parts. If a part is
slightly damaged, carefully determine if it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, proper mounting and any other
conditions that may affect the operation of the tool.
A part that is damaged should be properly repaired
or replaced by an authorised service facility, unless
otherwise indicated in this Instruction Manual.
Defective switches must be replaced by an authorised
service facility. Do not use a tool if the switch does
not turn the tool on and off correctly.
19. Guard against electric shock. Prevent body contact
with grounded objects such as water pipes, radiators,
cookers and refrigerator enclosures.
20. Use only approved parts. When servicing, use only
identical replacement parts. Use an authorised service
facility to fit replacement parts.
WARNING. The use of an accessory or attachment, other
than those recommended in this Instruction Manual, may
present a risk of personal injury.
Additional safety rules for Heat guns
• A fire may arise if the appliance is not use with care.
• Be careful when using the appliance in places where
there are combustible materials, such as inflammable
liquids, rags, wood shavings and the like.
• Do not apply the heat to the same place for a long
time.
• Do not use in the presence of an explosive atmosphere.
• Heat may be conducted to combustible materials which
are out of sight
• Place the appliance on its stand whenever you place it
down and after use and allow to cool before storage;
• Never leave the appliance unattended when in use.
• Rags, cloths, cord, string, wood shavings and the like
should never be left around the work area.
• Support the work properly.
• If you are interrupted when operating the appliance,
complete the process and switch off before looking up.
• When using the appliance, use safety equipment
including safety goggles or shield, breathing mask and
protective clothing including safety gloves.
Wear goggles
Wear earmuffs
Wear a breathing mask
• Never attempt to use the appliance to dry animals,
clothing or hair.
• Never use this appliance as a hair dryer.
• Always use in ventilated areas.
• Do not leave the appliance unattended when in use.
• This product is designed for light domestic use only, it
is not designed for industrial purposes and whilst every
care has been taken to make hot air gun safe, accidents
can happen. By following the simple safety guide you
can avoid accidents.
WARNING: During application the heat nozzle must be
kept at least 16mm away from the work piece. This is to
allow air flow.