Global Machinery Company HG2000K - Manual (Page 7)

7
Features:
Two Speed Rocker Switch:
The rocker switch can be adjusted to 3 positions and
these are:
Variable Temperature Control
The variable temperature
control enables the
temperature to be set and
adjusted between 50°C and
650°C, depending upon the
type of material and the
work to be carried.
Temperature Indicator
The temperature indicator
gives the temperature during
operation. 6 LED’s are
placed on the box lid. Each
one represents a different
temperature range:
Note: The temperature indicator gives the temperature for
reference only.
Safety Cut Out
This unit is equipped with a safety cut-out device which
will operate if the internal temperature gets too high.
Should this feature activate, switch off the unit and wait
for the unit to cool down. When the unit has cooled
sufficiently normal operation can be resumed.
PLEASE NOTE: The reset time of the hot air gun’s safety
cut-out fuse is approximately 30 minutes, after which
normal operation can resume.
Assembling the Wire Stand
For convenience, the wire stand should be set up
before operating; therefore the tool can be rested when
LED No: Colour Temperature (C)
1 Yellow 50 o
2 Yellow 100 o
3 Green 200 o
4 Green 350 o
5 Red 500 o
6 Red 650 o
Position 0:
Stop/Off
Position 1:
50° - 550°C
Position 2:
50° - 650°C