Gateway 9415 - Manual (Page 25)

20 www.gateway.com
Starting your server
Before you start your server for the first time:
■ Make sure that the server and monitor are plugged into a power outlet or surge
protector and that the surge protector (if you are using one) is turned on.
■ Make sure that all cables are connected securely to the correct ports and jacks on the
back of the server.
To start the server:
1
Turn on any peripheral devices connected to the server.
2
Press the power button.
Caution When you connect peripheral devices to the server, make sure that
your server and devices are turned off and the power cords are
unplugged.
Power/sleep LED
Power button
System fault LED Reset button
8510522.book Page 20 Wednesday, March 16, 2005 11:19 AM