Gateway 9415 - Manual (Page 38)

33 www.gateway.com
Control the
server Boot flags (select from available boot
flags)
■ Set the flag — one time reboot
■ Reboot the system
Configure boot order
Power control
■ Power on
■ Power off
Power control
Control the power state by
creating button pushes — as
if performed on the front
panel.
Reset Power control
IPMI control
■ Power on
■ Power off
IPMI control
Send the chipset a power
control command. The same
functionality as if done over
LAN or by GSM.
IPMI command screen
■ Issue an IPMI command (text or hex)
Issue an IPMI command
Set up the server Language selection (display loaded
language files) Select the LCP display
language
Status setup
■ Interval timing (set time to retrieve
status)
■ Subsystem mask (mask off
subsystems)
Set sensor refresh interval
Password setup
■ Password exists/does not exist
■ Create/change password
Password setup
Remote access rights
■ View (grant or deny)
■ Write (grant or deny)
■ Buttons (grant or deny)
Remote access control
Menu Options Description
8510522.book Page 33 Wednesday, March 16, 2005 11:19 AM