Gefen EXT-AVSCALER-PRO - Manual (Page 10)

7
How to Connect the Audio/Video Scaler Pro with Amplifi er
1. Connect source devices to the Audio/Video Scaler Pro with Amplifi er using
user supplied cables. The following input options are available.
Composite - Single RCA video cable.
S-Video - Single s-video cable.
Component - 3 RCA video cables.
HDMI 1 - Single HDMI cable.
HDMI 2 - Single HDMI cable.
DVI - Single DVI-I, DVI-A, or DVI-D cable.
NOTE:
All analog video sources will be converted to digital an output through the
HDMI Output Port.
2. Connect audio sources to the Audio/Video Scaler Pro with Amplifi er using
user supplied cables. Audio input options are available for the following
source inputs.
Composite - Analog stereo using a 2 RCA analog stereo cable.
S-Video - Analog stereo using a 2 RCA analog stereo cable.
Component - Analog stereo using a 2 RCA analog stereo cable.
HDMI 1 - Embedded audio through the HDMI cable and both a digital
S/PDIF (coaxial) and digital TOSLINK (optical) using digital
audio cables.
HDMI 2 - Embedded audio through the HDMI cable and both a digital
S/PDIF (coaxial) and digital TOSLINK (optical) using digital
audio cables.
DVI - Analog stereo using a 3.5mm analog stereo cable.
NOTE:
All analog sources will be converted to digital and output through the
HDMI, digital S/PDIF, and digital TOSLink outputs.
3. Connect a HDMI cable device to the Audio/Video Scaler Pro with Amplifi er’s
HDMI Output Port using the supplied HDMI cable.
4. Connect a right and left speaker to the spring-loaded speaker terminals.
NOTE:
Speaker impedance must be 8Ω or higher.
5. Optionally, connect the digital S/PDIF (coaxial) or digital TOSLINK (optical)
audio outputs to a digital audio input device.
6. Connect the included 24V DC power supply to the Audio/Video Scaler Pro
with Amplifi er and to an open wall power socket.
7. Power on the display fi rst and the sources second.
CONNECTING THE AUDIO/VIDEO SCALER PRO WITH AMPLIFIER