Gefen EXT-AVSCALER-PRO - Manual (Page 8)

5
1 IR Receiver
This receivers will accept commands from the included RMT-SR-IR remote
control. There must be line-of-sight between this receiver and the remote control
for successful operation to occur.
2 Power Indicator LED
This LED indicator will become active once the included 5V DC power adapter
has bee properly connected between the sender unit and an open wall power
socket.
3 Selected Input LED
Each input source has an LED that will become active when it is selected. All
input sources are listed below.
CV Composite input
SV S-video input
Comp Component input
HDMI 1 HDMI 1 input
HDMI 2 HDMI 2 input
DVI DVI input
4 RS-232 Serial Communications Port
This port can accept commands from an RS-232 device to control the input
switching. Please see page 17 for more details on this feature.
5 Analog Stereo Input Port for Composite
This input will accept audio from one pair of RCA analog stereo cables for use
with the composite input.
6 Composite Input Port
This input will accept video from one RCA composite source. The composite
source will be digitally converted for output through the HDMI Output Port.
7 Analog Stereo Input Port for Component
This input will accept audio from one pair of RCA analog stereo cables for use
with the component input.
8 24V Power Supply Input Port
Connect the included 24V DC power supply to this input. Once properly
connected between the unit and an open wall power socket, the Power Indicator
LED should become active.
9 Stereo Speaker Terminals
The stereo speaker output terminals use spring-loaded compression. These
terminals are designed to accept 8Ω speakers.
EXT-AVSCALER-PRO PANEL DESCRIPTIONS