Gefen EXT-AVSCALER-PRO - Manual (Page 19)

16
Remote
Remote Channel 1:
Default
1 2
Remote Channel 2:
1 2
Remote Channel 3:
1 2
Remote Channel 4:
1 2
How to Resolve IR Code Confl icts
In the event that IR commands from other remote controls confl ict with the
supplied RMT-SR-IR remote control, changing the remote channel will alleviate
this issue. The RMT-SR-IR remote control has DIP SWITCHES for confi guring
the remote channel. The A/V Scaler Pro with Amplifi er must match the remote
channel set in the RMT-SR-IR remote control. Please see page 10 for instruction
on how to confi gure the channel on the A/V Scaler Pro with Amplifi er. By default,
both the A/V Scaler Pro with Amplifi er and the RMT-SR-IR remote control are set
to Channel 1.
RMT-SR-IR CODE CONFIGURATION