GIGABYTE GA-7VT600 - Manual (Page 17)

- 13 - Hardware Installation Process
English
Step 2: Install the Central Processing Unit (CPU)
Step 2-1: CPU Installation
Before installing the processor, adhere to the following warning:
1. Please make sure the CPU type is supported by the motherboard.
2. If you do not match the CPU socket Pin 1 and CPU cut edge well, it will
cause improper installation. Please change the insert orientation.
Socket Actuation Lever
Pin1 indicator
CPU Top View CPU Bottom View
1. Pull up the CPU socket lever and
up to 90-degree angle.
2. Locate Pin 1 in the socket and look
for a (golden) cut edge on the CPU
upper corner. Then insert the CPU
into the socket.