English frequency/voltage control – GIGABYTE GA-7VT600 User Manual
Page 53
BIOS Setup
- 49 -
English
Frequency/Voltage Control
Figure 8: Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
Frequency/Voltage Control
Spread Spectrum Modulated
[Enabled]
Item Help
CPU Host Clock Control
[Disable]
Menu Level
Ú
CPU Host Frequency(MHz)
133
Ú
PCI/AGP Frequency(MHz)
33/66
DRAM Clock(MHz)
[Auto]
CPU OverVoltage Control
[Auto]
AGP OverVoltage Control
[Auto]
DIMM OverVoltage Control
[Auto]
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
)
)
)
)
)Spread Spectrum Modulated
Disabled
Disable clock spread spectrum.
Enabled
Enable clock spread spectrum.(Default value)
)
)
)
)
)CPU Host Clock Control
Note: If system hangs up before enter CMOS setup utility, wait for 20 sec for times out reboot . When
time out occur, system will reset and run at CPU default Host clock at next boot.
Disable
Disable CPU Host Clock Control.(Default value)
Enable
Enable CPU Host Clock Control.
)
)
)
)
)CPU Host Frequency (MHz) (By switch SW1)
100
Set CPU Host Clock to 100MHz~132MHz.
133
Set CPU Host Clock to 133MHz~165MHz.
166
Set CPU Host Clock to 166MHz~200MHz.
200
Set CPU Host Clock to 200MHz~254MHz.
Ú
Those items will be available when "CPU Host Clock Control" is set to Enabled.