English – GIGABYTE GA-7VT600 User Manual
Page 48
- 44 -
GA-7VT600(-L) Motherboard
English
)
)
)
)
) Power LED in S1 state
Blinking
In standby mode(S1), power LED will blink. (Default value)
Dual/Off
In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
)
)
)
)
) Soft-off by PWRBTN
Instant-off
Press power button then Power off instantly. (Default value)
Delay 4 Sec.
Press power button 4 sec to Power off. Enter suspend if button is pressed
less than 4 sec.
)
)
)
)
) AC Back Function
Memory
System power on depends on the status before AC lost.
Soft-Off
Always in Off state when AC back. (Default value)
Full-On
Always power on the system when AC back.
)
)
)
)
) Keyboard Power On
This feature allows you to set the method for powering-on the system.
The option "Password" allows you to set up to 8 alphanumeric characters to power-on the system.
The option "Keyboard 98" allows you to use the standard keyboard 98 to power on the system.
Password
Enter from 1 to 8 characters to set the Keyboard Power On Password.
Disabled
Disabled this function. (Default value)
Keyboard 98
If your keyboard have "POWER Key" button, you can press the key to
power on your system.
)
)
)
)
) Mouse Power On
Disabled
Can't Power on system by Mouse Event. (Default value)
Enabled
Can Power on system by Mouse Event.