Giantec 2000 - Manual (Page 23)

Tracer 2000 DVR user manual
Version 3.0 Page 23 of 36
CHAPTER V CMOS SETTING
Introduction
This manual discusses Award™ Setup program built into the ROM BIOS. The Setup program allows
users to modify the basic system configuration. This special information is then stored in battery-backed
RAM so that it retains the Setup information when the power is turned off.
If system behaviors abnormal situation and you wish to check hardware values of CMOS…you may
connect a USB keyboard, restart the system by turning it OFF then ON or pressing the "RESET" button
on the system case. You may also restart by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.
Press <DEL> key to enter CMOS setting pages.
Setup Pages
CMOS Setup Utility - Copyright ( C ) 1984-1998
Standard CMOS Feature
Advanced BIOS Feature
Advanced Chipset Feature
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Esc : Quit F9 : Menu in BIOS
↑ ↓ ← → : Select Item
F10 : Save & Exit Setup
Time, Date, Hard Disk Type…