Giantec 2000 User Manual
Page 9
Advertising
Tracer 2000 DVR user manual
Version 3.0 Page 9 of 36
1 INDICATOR
Power LED: Green light shows power is on.
Status LED: Green light continuous on means
working properly.
Green light blinking shows status of recording
Red light continuous on means no signal (This
may implies HDD damaged, No Power, or Access
Error.)
Red light blinking shows status of recycling. (HDD
space less than 1 Gigabyte)
2 CABLE CONNECTION
Following is the basic device must be prepared before to start installation complete system.
1. Tracer 2000
2. CCD cameras
3. VGA monitor
Please follow the procedure to connect the cable.
2.1. Connect VGA Monitor
Power LED
Status LED
Advertising