Giantec 2000 - Manual (Page 5)

Tracer 2000 DVR user manual
Version 3.0 Page 5 of 36
CHAPTER I INTRODUCTION
Thank you for purchasing Tracer 2000 DVR; this manual will guide you through the setup,
installation, and use of all our DVR systems.
Before proceeding, please read this manual thoroughly!
If you have any questions or concerns that cannot be solved by following this manual, please
visit our web site at http://www.giantec.net
LIMITED WARRANTY
Giantec Inc. warrants this product to be in compliance with its own plans and specifications.
Moreover, to be free from defects in materials and workmanship under normal use and service
for all parts (1) one year after the original purchase date. During this period Giantec Inc. will
replace parts at no charge, however, labor cost will be laid after one (1) year. Please contact
your dealer/distributor for details.
This warranty excludes damages due to misuse or neglect. Also this warranty does not cover
damages beyond DVR’s control. In no event shall Giantec Inc. be liable for any direct, indirect
or consequential damages; loss of anticipated profits, loss of time or any other losses incurred
by the buyer in connection with the purchase, installation, operation or failure of this product.
For more details on the limitation of this warranty, contact your distributor.
FUNCTION INTRODUCTION
Thank you for using TRACER 2000 video surveillance system. TRACER can be used to
transfer captured video signal from analog to digital using the compression format for record
and play. They can also capture videos of up to 4 / 8 /16 cameras for model TRACER-2404,
TRACER-2408, and TRACER-2416(4 /8/16 BNC inputs) with 4 audio sources at the same time.
The built-in video player makes it easy to play back captured video files. The system also
provides several control modes like motion detection, schedule record, P/T/Z control and
remote surveillance applications.