Customcool, About customcool, On some models) – GE 200D8074P050 User Manual

Page 7

Advertising
background image

7

Empty the pan. Place the Chill/Thaw tray

in the pan. Place the items on the tray

and close the pan completely.
LCD Models:
Access by:
Home > Options > Refrigerator

Options > CustomCool Pan
Non-LCD Models:
Select the ExpressThaw

, ExpressChill

or SelectTemp

pad. The display and SET

light will come on. Tap the pad until the

light appears next to the desired setting.
Use the following chart to determine the

best setting to use.



ExpressChill can be set to 15, 30 or 45

minutes. The default is 15 minutes.



To stop a feature before it is finished:

For LCD Models:
Go into that feature’s menu and press

the OFF button.

For Non-LCD Models:
Tap that feature’s pad until no options

are selected and the display is off.



During ExpressThaw and

ExpressChill,the display on the

controls will count down the time

in the cycle (on some models).



After the ExpressThaw cycle is

complete, the pan will reset to the

MEAT setting (32°F [0°C]) to help

preserve thawed items until they

are used.



The displayed actual temperature of

the CustomCool pan may vary slightly

from the SET temperature based on

usage and operating environment.

NOTE: For food safety reasons, it is

recommended that foods be wrapped in

plastic wrap when using ExpressThaw.

This will help contain meat juices and improve

thawing performance.

About CustomCool

.

(on some models)

GEAppliances.com

The CustomCool

feature is used to quickly

chill items, thaw items or hold the pan at a

specific temperature. This feature is a system

of dampers, a fan, a temperature thermistor

and a heater.

The pan is tightly sealed to prevent

temperature fluctuations in the rest of

the refrigerator. The controls for this pan

are located on the dispenser with the

temperature controls.

How to Use

ExpressThaw

To remove:

Pull the drawer out to the stop position.
Rotate all four swing locks to the unlock

position.

Lift the front of the drawer up and out.

To replace:

Make sure all four swing locks are in

the unlock position.

Place the sides of the drawer into

the drawer supports, making sure

the swing locks fit on the drawer slots.

Lock all four swing locks by rotating them

to the lock position.

How to Remove and Replace the Drawer

ExpressChill

Consumer S

up

por
t

Troubleshooting T

ips

Operating Instructions

Safety Instructions

Installation

Instructions

LCD Models Only

How it Works

R

EFRIGERATOR

O

PTIONS

B

ACK

B

EVERAGE

C

ENTER

C

USTOM

C

OOL

P

AN

T

URBO

C

OOL

LCD Models Only

Advertising