Overview of potential hazards, Important installation instructions, Warning – Genie 3627336241 User Manual

Page 3

Advertising
background image

For Help, call 1-800-35-GENIE or visit www.geniecompany.com

3

oVeRView of poteNtial haZaRDS

Overhead doors are large, heavy objects that move with the help of springs under high tension and electric motors . Since moving objects, springs
under tension, and electric motors can cause injuries, your safety and the safety of others depend on you reading the information in this manual . If you
have questions or do not understand the information presented, call The Genie Company . or your local Genie Distributor .

POTENTIAL HAZARD

EFFECT

PREVENTION

• Keep people clear of opening while door is moving.
• Do Not allow children to play with the door operator .
• Do Not operate a door that jams or one that has a broken spring .

MOVING DOOR

WARNING:

Could result in death

or serious injury .

• Turn off power before removing operator cover.
• When replacing cover, make sure wires are not pinched or near

moving parts .
• Operator must be properly grounded.

ELECTRICAL SHOCK

• Do Not try to remove, repair or adjust springs or anything to

which door spring parts are fastened, such as, wood blocks,

steel brackets, cables or other like items .
• Repairs and adjustments must be made by a trained door

system technician using proper tools and instructions .

HIGH SPRING TENSION

WARNING:

Could result in death

or serious injury .

WARNING:

Could result in death

or serious injury .

In this section, and those that follow, the words Danger, Warning and Caution are used to emphasize important safety
information . The word:

indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury .

indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury .

indicates a potentially hazardous situation which, if not avoided, may result in injury or property damage .

The word NOTE is used to indicate important steps to be followed or important considerations .

DANGER:

CAUTION:

WARNING:

Safe-T-Beam® (STB) Non-Contact Reversing System
Places an invisible beam across door opening, that reverses
the door during down travel to the fully open position if
anything passes through beam .

Safe-T-Reverse® Contact Reversing System

Automatically stops and reverses a closing door within 2
seconds of contact with an object .

Safe-T-Stop® Timed Reversed System

Automatically opens a closing door, if door does not close
within 30 seconds .

ForceGuard® Control

Used to set the force required for opening and closing
door . For maximum safety, set the minimum force required
to fully open and close door .

Automatic Lighting System

Light bulbs up to 60 Watts max . , used for safer entries and
exits . The lights turn on when door is activated and
automatically turn off 4 .5 minutes later .

Manual Emergency Release

Allows the garage door to be opened or closed manually
for emergencies or maintenance .

IMPORTANT INSTALLATION

INSTRUCTIONS

1 READ AND FOLLOW ALL SAFETY, INSTALL ATION AND

OPERATION INSTRUCTIONS . If you have any

questions or do not understand an instruction, call

your authorized Genie installation professional .

2 Do Not install operator on an improperly balanced

door . An improperly balanced door could cause

severe injury . Repairs and adjustments to cables,

spring assembly, and other hardware must be made

by a trained service person using proper tools and

instructions .

3 Remove all ropes, and disable all locks connected to

the door before installing operator .

4 Install door operator 7 feet or more above the floor .

Mount the emergency release knob 6 feet above

the floor .

5 Do Not connect the operator to the source of power

until instructed to do so .

6 Locate the control button:

• Within sight of door.

• At a minimum height of 5 feet, so small children

cannot reach it .

• Away from all moving parts of the door.

7 Install the entrapment WARNING label next to the

wall button or console . Install the emergency release

tag on, or next to, the emergency release

8 The operator must reverse when the door contacts a

1-1/2 inch high object on the floor at the center of

the doorway . This is about the size of a 2” x 4” board

laid flat .

t

o

ReDuCe

the

RiSk

of

SeVeRe

iNjuRy

oR

Death

:

WARNING:

S

afety

f

eatuReS

Advertising