Generac 1292-2 - Manual (Page 9)

Generac Portable Products 2,300 PSI High Pressure Washer
9
How to Use the Adjustable Nozzle
You now should know how to START your pressure
washer and how to STOP it. The information in this
section will tell you how to adjust the spray pattern
and to apply detergent or other cleaning chemicals.
DANGER! Never adjust spray pattern when
spraying. Never put hands in front of nozzle to
adjust spray pattern.
• Slide the nozzle forward when you wish to adjust the
spray to low pressure mode (Figure 12). Slide the
nozzle backward to achieve high pressure.
• Point the nozzle down towards a firm surface and
press the trigger to test the pattern (Figure 13).
• Twisting the nozzle adjusts the spray pattern from a
narrow pattern to a fan pattern (Figure 14).
• For most effective cleaning, keep spray nozzle
between 8 to 24 inches away from cleaning surface.
• If you get the spray nozzle too close, especially
using high pressure mode, you may damage the
surface being cleaned.
• Do Not get closer than 8 inches when cleaning tires.
Figure 14 — Adjusting the Nozzle for Spray Pattern
Rotate nozzle
counterclockwise for fan
spray pattern
Rotate nozzle
clockwise for narrow
spray pattern
Slide nozzle
backward for High
Pressure Mode
Slide nozzle forward for
low pressure mode and
detergent application
Figure 12 — Adjusting Nozzle for Pressure
Figure 13 — Testing the Spray Pattern