Procedures for registration, Registering and deleting projectors for monitoring – Epson EasyMP User Manual
Page 13
Registering and deleting projectors for monitoring
13
Procedures for registration
Procedure
A
Select the projector(s) to be registered from the displayed
list, and then click "Edit".
The following window will be displayed.
Make the necessary settings while referring to the following table.
Display name
Enter the name of the projector(s) to be
displayed in Grouping view or Detail list view.
Up to a maximum of 32 bytes can be entered. A
space cannot be used as the first character.
Display icon
Select the icon(s) to be displayed in Grouping
view or Detail list view.
Parent group
Select when registering a projector in a group.
If no groups have been created, this cannot be
selected. s "Registering several projectors to a
monitoring group all at once"
Projector
name
This shows the name that has been registered on
the projector.
IP address
This shows the IP address for the registered
projector.
Use Serial W
TCP/IP
conversion
adaptor.
This cannot be selected when registering
projectors using automatic search.
Port Number
This cannot be selected when registering
projectors using automatic search.
Monitor
Password
If a Monitor Password has been set for the
projector, be sure to enter the Monitor Password
that has been set. If the correct password is not
entered at this time, it will not be possible to
monitor and control the projector even though it
is registered.
Description
You can enter some kind of memo about the
projector. The details you enter here will be
displayed at the projector properties.
Up to a maximum of 60 bytes can be entered.
Monitor
Select this when you want monitoring to start.