Epson EasyMP - Manual (Page 36)

Using the control functions
36
Carrying out control using a web browser (Web
control)
You can use the computer's web browser to change the configuration
menu settings for projectors.
Procedure
A
Right-click on the icon of a projector to be controlled in
Grouping view or Detail list view and select "Web control".
B
The web browser will open and the Web control window will
be displayed.
Web control lets you set the same details as the configuration menu for
the projector. s Projector's User's Guide
q You can select projectors and right-click on them to select Web control
even when the following are being displayed.
Group properties s p.31
Warning and Error Projector list (Control operations can only be carried
out for projectors with a warning status.) s
p.28
Carrying out control using timer settings
This is useful for carrying out certain control operations such as turning
a projector's power on and off at specified times every day or every week.
Timer settings can be carried out either for a single projector only, or all
at once for all projectors in a group.
Procedure
Select "Timer" - "Timer Settings" from the Tool menu.
The following window will be displayed and you can then check the timer
setting status.
The details that can be checked and operations that can be carried out at
this time are given below.
1 Projectors
Selects a group or projector to check the status of.
When a group is selected, the timer setting statuses for all projectors
in that group are displayed.