Geemarc AMPLI 100VM - Manual (Page 6)

5
1 - Answering Incoming Call
- When an incoming call is received the phone will ring and flash.
To answer the call lift the handset and speak.
- On completion of the call, carefully replace the handset in the
cradle to release the line.
2 - Volume Receiving Adjustment
You can increase the volume according to your own hearing
requirements.
Use the button, located on the front side, to adjust the
level according to your own hearing requirements.
3 - Tone Receiving Adjustment
If the receiver volume has been amplified, the tone control can
also be adjusted. You can adjust and increase the low frequency
or high frequency sounds with the tone slide control on the front
edge of the unit.
Note: The tone adjustment function will not be effective when the
receiver volume is set to normal level.
USING THE PHONE