Geemarc AMPLI 100VM - Manual (Page 9)

8
Hold Off:
In hold mode, put the handset on cradle. Then pick up the
handset again or if the parallel phone goes off hook, the Hold
function will be disabled and all speech meter LEDs are turned off.
12 - Amplification Setting
a.Set the AMPLIFY Switch located at rear side of unit to ON
position, the Amplification is auto on when handset is lifted.
b.Set the AMPLIFY Switch to OFF position, the
Amplification is off when handset is lifted.
13 - Receive Volume Amplification
When unit is off-hook, press the button to toggle the
amplification On & Off
Amplification On:
When amplification is on, the corresponding LED on, +15dB extra
amplification is applied to the handset receive volume control.
Amplification Off:
When amplification is off, the corresponding LED is off, no extra
amplification to the handset receive volume control.
14 - Flash Time Setting
a.Set the flash Switch located at rear side of unit .set to 100ms
position (for UK), the time is auto set in 100ms mode when
handset is lifted.
b.Set the flash Switch to 600ms position (for US), the time is auto
set in 600ms mode when handset is lifted.
USING THE PHONE