GE 840136200 - Manual (Page 5)

5
Features
(continued)
Automatic Shutoff Status Indicator
The Power On light comes on when the
iron is first
plugged in, and
will remain on
until the iron is
unplugged. The
light will stay on,
even if Fabric
Setting Indicator
is OFF/0.
If the iron is an Automatic Shutoff
model, the iron
will shut off after
1 hour and the
indicator box
around OFF/0 in
the Fabric Setting
indicator will
blink on and off.
Press the Temperature Selector to turn
the iron back on
for another hour
of ironing.
Retractable Cord
1. Pull cord to desired length. Do not
unwind cord
beyond
colored tape
indicator on
cord.
2. To store cord, press and hold the
Cord Release
Button while
guiding the
cord into the
storage area.
CAUTION: Hold plug while retracting
cord. Do not let cord retract freely.
Cord may jam on reel or loose cord
may whip back and forth and could
cause injury.
Vertical Steam
1. Follow Steps 1 through 3 in
“To Steam Iron.”
2. Hang garment in a location that is
not susceptible to damage from heat
or moisture. Do not hang in front of
wallpaper, window, or mirror.
3. Hold iron about 6 inches away from
garment and
press and
release the Blast
Button to steam
out wrinkles.
Do not press
Blast Button
more than once
every 2 seconds.
4. To turn iron off, turn Adjustable
Steam to Dry Iron
. Press
Temperature Selector. Set Fabric
Setting Indicator to OFF/0. Unplug
iron. The iron may be turned off by
pressing the Temperature Selector
button for 3 seconds.
5. Empty water from the iron following
directions in “Caring for Your Iron.”
NOTE: Do not allow hot soleplate to
touch delicate garments.
Temperature
Selector
Power
On
Light
5 LINEN
4 COTTON
3 RAYON
2 POLYESTER
1 SILK
OFF
840136200 Ev02 6/29/05 9:55 AM Page 5