GE 840136200 - Manual (Page 6)

6
Fabric Setting Chart
Dry iron using spray if necessary.
Dry iron on the wrong side of the fabric.
Iron while fabric is still damp.
Dry iron using spray if necessary.
Use a press cloth and steam iron on wrong
side of fabric.
Iron while still damp; use steam and/or spray.
Iron on wrong side of fabric while still damp.
OFF/0
Acrylic
Silk
Polyester
Rayon
Wool
Cotton
Linen
Dry Iron
Steam Range
Steam
Setting
Caring for Your Iron
1
1
2
3
3
4
5
Temperature Setting
Iron
1. The Water Tank of your iron should
be emptied after each use. Turn
Adjustable Steam to Dry Iron
.
Press Temperature Selector.
Set Fabric Setting Indicator to
OFF/0
. Unplug the iron and hold
over a sink. Turn iron upside down
until Water Tank opening is parallel
with sink. Water will run out of water
tank opening.
2. After iron has completely cooled, fully
retract cord into iron or loop cord
loosely around iron, as applicable,
and store in an upright position.
Do not store iron laying flat on
soleplate.
Soleplate
1. Never iron over zippers, pins, metal
rivets, or snaps, as these may scratch
the soleplate.
2. To clean occasional build-up on the
soleplate, wipe with a sudsy cloth.
Do not use abrasive cleansers or
metal scouring pads.
3. Always store iron upright in the heel
rest position.
Ironing Instructions
840136200 Ev02 6/29/05 9:55 AM Page 6