GoVideo DVR4000 - Manual (Page 28)

22 DVD+VCR User’s Guide
RECORD SETTINGS
1 O P E N “ S E T U P M E N U ”
Press SETUP/ENTER.
2 S E L E C T “ V C R & C H A N N E L S E T U P ”
Use the UP/DOWN arrow keys to select
“VCR & Channel Setup,” then press the
RIGHT arrow key to select.
3 A D J U S T R E C O R D S E T T I N G S
Use the UP/DOWN/RIGHT arrow keys to
select and set the following:
D a t e / T i m e S t a m p
Timer – The date, time, and record
source will be “stamped” (superimposed)
briefly at the start of all timer recordings.
All – The date, time, and record source
will be stamped briefly at the start of all
recordings.
None – The date, time, and record
source will not be stamped.
R e c o r d S o u r c e
Set your VCR to record from the following
sources.
Auto – Whatever is currently visible on
screen.
Tuner – The DVD+VCR’s built-in televi-
sion tuner.
Line 1 – An external source, such as a
camcorder, connected to the front line
inputs.
Line 2 – An external source, such as a
satellite receiver, connected to the rear
line inputs.
DVD – A DVD playing in the DVD deck.
Follow these steps to set the default VCR
record settings for your DVD+VCR.
press
SETUP MENU
Set Timer Recording
Child Lock Off
Set Clock
DVD Setup
VCR & Channel Setup
Language/Langue/Idioma
/ To Move To Select
RETURN to Quit
VCR & CHANNEL SETUP
Channel Setup
Date/Time Stamp Timer
Auto Play/Rewind Both
Record Source Auto
Panel Display Auto
To Move / To Select
RETURN To Go Back
Select VCR & Channel Setup
Select Date/Time Stamp &
Record Source
SETUP
/ENTER