GoVideo DVR4000 - Manual (Page 42)

36 DVD+VCR User’s Guide
AL
TERNA
TIVE CABLE BOX HOOKUP
Follow these steps if you have a cable box and
want to be able to watch a second channel while
recording a TV program.
N O T E
• With the TV/VCR button set to VCR, you should see the channel that the VCR is tuned to. With TV/VCR
set to TV, you should see the channel that the cable box is tuned to.
• With this hookup, you can watch scrambled channels, but you will not be able to record them.
1 C O N N E C T C A B L E T O T V
Connect a coaxial cable from the
wall outlet to the “IN (From Ant)”
jack on the back panel of the
DVD+VCR.
2 C O N N E C T T H E V C R T O
C A B L E B O X
Connect the RF cable from the TV
Out on the back panel of the
DVD+VCR to the “In from Cable”
jack on the Cable Box.
3 C O N N E C T C A B L E B O X T O T V
Connect an RF cable from the “Out
to TV” jack on the Cable Box to the
“Antenna In” connection on the
back of the TV.
Input Output
Cable Box
VHF/UHF
TV
From Cable
Wall Outlet
To Cable
Box Input
4 T U N E T H E T V
Tune the TV to channel 3 or 4,
whichever is used by your cable
system.
5 T U N E C A B L E B O X
With all three devices turned on,
tune your Cable Box to channel 3
and then press SETUP/ENTER.
• Make sure the “Setup Menu”
appears on-screen. If you see
the menu, you have completed
this connection.