GE 28115 Series - Manual (Page 19)

19
In Use Indicator on Base
The in use indicator on the base will flash to alert you to an incoming call, during paging, or if
you have a message waiting from your service provider. The indicator will remain lit when the
line is in use.
IMPORTANT: In order to use this unit’s Visual Message Waiting
Indicator (VMWI) feature, you must subscribe to this service from your
phone company.
Speakerphone Operation
.
NOTE: If you are using the speakerphone, remain close to handset so the
party you are speaking to can hear you.
Press the speaker button to switch from handset to speaker mode.
Press the talk button to switch from speakerphone to handset mode.
Press the end button to end conversation.
Making a Call
1. Press the talk or speaker button. Dial the desired number.
- OR -
Dial the number first, then press the talk or speaker button.
- OR -
Press the vol/CID ( 6 or 5) button to select the desired record, then press the talk or
speaker button.
. When finished, press the end button to hang up.
NOTE: You may enter up to 32 pre-dial digits.
NOTE: If you want to delete the pre-dial number you entered, press the
del/conf/intercom button until all of the digits are erased.
Answering Calls
1. When the phone rings, press the speaker button on the handset,
- OR -
Pick up the handset and press the talk button.