Graco 405 - Manual (Page 11)

Forerunner 405 Owner’s Manual 5
Getting Started
t e s
a
r
l
e
p /
/
ti
e m
da
te
Chargng
clp
Step 3: Configure
Your Forerunner
The first time you use your
Forerunner, follow the on-screen
instructions to learn how to use the
bezel and configure the Forerunner.
If you are using an ANT+ heart
rate monitor, select Yes during the
configuration to allow the heart rate
monitor to pair (connect) with your
Forerunner. See Step 5 for more
information.
Step 4: Acquire
Satellite Signals
To set the correct time of day and
begin using the Forerunner, you must
acquire GPS satellite signals. It may
take a few minutes to acquire signals.
note: To turn off the
GPS receiver and use the
Forerunner indoors, see
page 21 .
note: You cannot acquire
satellites in power save mode.
To exit power save mode,
press enter or quit .
1. Go outdoors to an open area. For
the best reception, make sure
the antenna of the Forerunner is
oriented toward the sky.