GE 26958 - Manual (Page 8)

8
I
NSTALLATION
D
ESKTOP
I
NSTALLATION
1. Make sure the mounting bracket is securely fastened to the bottom of
the base.
2. Set the TONE/PULSE switch to TONE for touch-tone service, or PULSE
for rotary service. If you don’t know which type of service you have,
check with the phone company.
3. Set RINGER switch (on the handset) to HI.
4. Plug the coiled cord into the corded handset and the other end into the
into the jack on the side of the base.
5. Place the corded handset in the base.
6. Plug the power supply cord into the POWER 12V DC jack on the base
and the other end into an AC electrical outlet.
7. Plug the long telephone line cord into the PHONE LINE jack on the back
of the base, and plug the other end into a modular phone jack.
8. Raise the base antenna.
Installation continued on next page.
CAUTION: Use only the ATLINKS USA 5-2510(black)/5-2511(white)
power supply that came with this unit. Using other power supplies may
damage the unit.
5
4
3
1
2
8
6
7