Geemarc AMPLIVOICE50 - Manual (Page 14)

14
USING THE TELEPHONE
Making a Call – Hands Free
Dial the number on the keypad in the on-hook position
Use DELETE if necessary to cancel and correct a wrong digit
Press and the number will be dialled automatically. The handsfree
function (speaker) is now activated and the LED indicator next to the
button will be illuminated.
When the third party answers the call, you may speak with the
telephone in the hands free mode ( handset in the cradle). Speak
towards the microphone located on the front edge of the telephone.
To end the call, press
Note: To deactivate the Hands Free function during a call, lift the
handset. To activate the Hands Free function during the call, press
and replace the handset on the cradle at the same time.
Also, when in hands free mode, only one person may talk at a time.
The switch-over between speaker and microphone is automatic. This is
dependent on the sound level of the incoming call and the microphone
respectively. It is therefore essential that there are no loud noises, e.g.
music, in the immediate vicinity of the telephone, as this will disrupt the
hands free function.