Phone book, Create a phone book entry – Geemarc AMPLIVOICE50 User Manual
Page 21
21
Telephone numbers and associated names can be stored in the phone
book.
The phone book can contain 30 telephone numbers (maximum of 22 digits)
with names (maximum of 16 letters). If you subscribe to a caller ID service
the name in the phone book will be shown for incoming calls.
Create a Phone Book Entry
Press MENU
Use ▲ or ▼to select STORE NUMBER
Press DIAL to select
Using the keypad, enter the desired number (up to 22 digits)
Use DELETE if necessary to cancel and correct a wrong digit
When the number is correct, press DIAL to confirm
Enter the name, select the desired letter by pressing the
corresponding key one or more times (see table below)
When the name is correct, press DIAL to store the new
entry in the phone book
SAVED will be displayed, folllowed by NAME RECORDING.
If you wish the name to be read aloud with its associated number,
you must take the following step:
Press and hold DIAL until a tone is heard and “VOICE” flashes
on the display
Say the desired name. Speak clearly and at a distance of 15-20cm
from the machine. The recording can be up to 3 seconds long
Release DIAL
Press CID when you are ready to exit
PHONE BOOK