GE WBVH6240 - Manual (Page 56)

– 56 –
Error Code Description Problem Possible Cause/Action
E61 Door unlock
switch failure Switch failure
occurs during
unlock. Power down (unplug) machine, wait 30 seconds and
retry.
Check wiring and connections between door lock
and main control.
Check door lock switches and solenoid.
Replace main control if wiring, switches, and
solenoid test functional.
•
•
•
•
E62 System contact
failure Load failure
occurs. Heater/
pump/pressure
switch/door
lock/water
valves/
dispenser
motor. Power down (unplug) machine, wait 30 seconds and
retry.
This error code found a shorted component.
Check integrity of wiring and connections - replace
harness if necessary.
Check integrity and connections of all loads and
replace as necessary.
Replace main control if actions do not resolve.
•
•
•
•
•
E63 Unexpected
open door Switch failure
occurs during
wake-up. Power down (unplug) machine, wait 30 seconds and
retry.
Check wiring and connections between door lock
and main control.
Check door lock switches and solenoid.
Replace main control if wiring, switches, and
solenoid test functional.
•
•
•
•
E64 Unexpected
open door while
running Switch failure
occurs during
cycle. Power down (unplug) machine, wait 30 seconds and
retry. Check wiring and connections between door
lock and main control.
Check door lock switches and solenoid.
Replace main control if wiring, switches, and
solenoid test functional.
•
•
•
E65 Water level
sensor failure
- foam Main level
switch is
satisfi ed before
foam level
switch. Check integrity of wiring and connections between
main control and water level sensor.
Check integrity of water level sensor t06 - replace if
necessary.
Replace main control if actions do not resolve.
•
•
•
E66 Water
temperature
sensor open Water
temperature
sensor open. Check water temperature sensor - t07
Check integrity of wiring and connections between
main control and water temperature sensor.
Check integrity of water temperature sensor -
replace if necessary.
•
•
•
(Continued Next Page)