GE twin set 21880 - Manual (Page 22)

– 21 –
Paging the Handset
If a handset has been misplaced, it is possible to call all the handsets.
Pressing the page key or any key in the handset can stop the
page tone.
Entering a Dialling Pause (P)
If the telephone is connected to a PABX system, it may be necessary
to insert a dialing pause. To do this, press
key after entering the
relevant digit in the pre-dial buffer, e.g. 0, for an external line (0P….).
A “P” appears in the display indicating a pause.
Switching the Key Lock On/Off
Incoming calls can still be received when key locked.
Press and hold “#” key for 2 seconds to activate or deactivate the
key lock. The ‘key’ icon turns ON.
Phone Book
The telephone can store up to 30 entries in the phone book with name
and call number. When the function is supported by the telephone
provider service and the caller, the handset displays the name of the
caller (when stored in the phone book).
Store Entries
Press key until the PHONE BOOK menu appears and press
“INT/OK” key.
Press or key to select “NEW ENTRY” and press
“INT/OK” key.
Enter number (max. 25 digits) and press “INT/OK” key when
finished. (delete incorrect entries by pressing “C” key).
Enter name (max. 10 characters) and press “INT/OK” key when
finished.
Select the ringing tone with or key and press
“INT/OK” key when finished.