Graco 8403 - Manual (Page 24)

Preparation and Initial Safety Checks
1. Make sure you have selected a suitable location for the car bed as
explained in section 2 (page 9). Remember not to place child on the
driver’s side, and remember to position child so feet are toward the
passenger side of the vehicle.
2. If a front passenger seat is used, slide the vehicle seat rearward as far as
possible from the dashboard.
3. Be sure that the vehicle seat back is locked in position. Do not use seats
that can fold down without having to release a lock or latch of some kind.
4. Place the car bed on the vehicle
seat so that:
a. All four of the car bed’s
feet are resting on the vehicle
seat Ê, and
b. The car bed is against the
vehicle seat back.
24
Ê
Top of car bed
should be slanted
Feet of
car bed