Graco 8403 - Manual (Page 26)

8. Now the vehicle seat belt must be tightened.
When tightening the seat belt around the car
bed, make sure there is no slack on either side
of the car bed or along the belt path.
To create a very tight installation, first remove
your child from the car bed. Push down hard with
one hand in the middle of the car bed while
pulling on the vehicle belt with the other hand
to tighten it Ê.
!
If you have a lap-only belt, go to step 9.
!
If you have a lap/shoulder combination belt, go
to step 10.
9. Tightening a lap-only belt:
!
An automatically adjusted lap belt Ë is tightened
by feeding the seat belt back into its retractor while
pushing down hard on the car bed. Make sure that
the seat belt is locked in place and very tight.
Л
К
26