Green-CleanUSA KV-P00801 - Manual (Page 14)

8/16-Port PS/2 KVM Switch
14 / 26
5.6 Set Password
F2- Password setting (SECURITY)
Press F2 at OSD main menu to activate password setting ( SECURITY).
Password setting menu for “PORT USER” pops up as illustrated below <fig.3>.
In this screen you may use the secondary OSD function keys:
F1(SUPERUSER), ESC(QUIT), ENTER(Complete).
¾ F1- To set password please press F1(SUPERUSER) to set SUPERUSER
password <fig.5>
No password for SUPERUSER is set at factory default. Please enter password of
maximum 8 characters. To remove SUPERUSER password, press ENTER at
“New Password” field.
¾ ENTER- Press ENTER to complete settings
¾ ESC- When setting is finished, press ESC return to OSD main menu.
Set PC Port Password :
<fig.3>
Retype your password for verification (CONFIRM) :
<fig.4>