Green-CleanUSA KV-P00801 - Manual (Page 16)

8/16-Port PS/2 KVM Switch
16 / 26
5.7 Scan Setting
F3- SELECT SCAN PORT
Press F3 at OSD main menu to select Auto Scan active port. If a port is
selected for Auto Scan, a icon appears, press F3 again, the icon will
disappear.
F4- AUTO SCAN
Press F4 at OSD main menu to enter Auto Scan function menu as illustrated
below <fig.9>. The secondary function keys are F1, F2 and F3
¾ F1- To start complete scanning, please press F1 (BROADCAST). All
ports will be scanned regardless whether the port is connected with
active computer. The scanning process will be stopped when ESC is
pressed. As scan terminates, KVM switch maintains at last scanned PC
port OSD.
¾ F2- To start scanning powered on PC only, please press F2 (POWERED
ON PC). To stop scanning, please press ESC button. As scan terminates,
KVM switch maintains at last scanned PC port OSD.
¾ F3- To scan selected PC, please press F3 (SCAN SELECT PC) to
commence scanning. To stop scanning, please press ESC button. As
scan terminates, KVM switch maintains at last scanned PC port OSD.
¾ ESC- Press ESC to Exit the Auto Scan menu.
AUTO SCAN
<fig. 9>